There's much to see here. So, take your time, look around, and learn all there is to know about us, metal roofing, steel buildings, decking and other products. We hope you enjoy our site and take a moment to drop us a line.
"I used to get material from other manufacturers in Oklahoma City. No one will give you better service than Gideon Steel. Even if you're a retail customer, they will treat you the same as they would a big company that places orders with them every day. They will take the time to answer your questions and help you get the material you need for your job."
– Vincente A.
My client was in the process of building a new structure. He received a quote from Gideon Steel to replace with metal roofing. The client wanted to verify that Gideon Steel was going to be the best choice to supply all the metal roofing products. I told the client I will call four established roofing companies (contractor / installers) to ask who they prefer to purchase metal roofing. Three out of the four roofing companies I called said, "we only buy from Gideon Steel". The fourth company named a competitor, but then also named Gideon Steel.
– Jimmy Blunt, Reliant Public Adjusters
We live in the Norman / Noble wild fire evacuation area in 2013. The firemen told us that if we did not have a metal roof, our home would have burned down. There were 4” x 8” size ambers on our porch. We are thankful our metal roof manufactured by Gideon Steel protected our home”.
– Jim B.
Simply put, Concealed Fastener Panels hide or conceal the screws from being seen after installation. Panels are secured by a Fastener Flange roll-formed into the panel or a separate clip underneath the panel surface. Adjacent panels are either "snap locked" into place or require to be "seamed" mechanically or manually. These panels are generically called Standing Seam or Architectural Panels.
Exposed Fastener panels reveal the screws after installation is complete. Some people refer to this type of as a "thru fastened panel". This type of panel is a more economical way to get a high quality metal roof or wall system vs Concealed Fastener panels. All of our panels are UL Rated.
Gideon provides top performing products that are constantly measured and tested from development to application by our vendor's board certified engineering department to ensure every part of the process is integrated into a quality assurance program.
Engineered Metal Building Systems (aka PEMB, or MBS) continues to be the most economical way to facilitate expansion or new construction for flex-space, office-warehouse or indoor sports facility. Metal Building Systems can be designed to take on a variety of size, shapes and facades achieving aesthetics that defy the steel building stereotype. Modern-industrial is the trend right now and we will be greatfull to assist with your project.
After 50+ years of service life, a Retro-fit Zee Purlin can allow a new metal roof to be installed on top of an existing PEMB metal roof without significantly disrupting operations inside the structure. Because of the cavity created between the old metal roof and the new metal roof you can insulate and ventilate this area during installation which means a thermal break occurs that can offer a positive impact to the structure's climate control and potential energy consumption.
Need help figuring out what you need?
Trying to determine if a metal roof is affordable?
Got a scaled architectural drawing?
Got a hand-sketched drawing?
No worries, we can help. Give us a call.
Gideon Steel's variety of decking materials gives you access to fast lead times on large and small steel decking requirements.
Thickness: 18 ga., 20 ga. and 22 ga.
Surface: Primered-Gray and Galvanized
Profile: A-deck, F-deck and B-deck
Sharkskin Ultra SA® is a high temperature rated peel and stick roof underlayment developed in 2006. Heavy duty Sharkskin Ultra® with an aggressive adhesive coating technology, makes this underlayment one of the highest quality and best performing Self-Adhering underlayment "all weather barriers" available to the industry. This product is Green, supports LEEDS, contains no asphalt or VOC’s and carries a 50-year warranty.
Daylighting is using natural light provided by the Sun to illuminate inside your building. Light Transmitting Panels installed as roofing Skylight or in the wall as a Wall-light are both effective ways you can achieve Daylighting goals.
Florida Building Code (FBC) Approved and Texas First Tier Coastal Counties Approved speaks to the durability of this 1.5mm (1/16") thick polycarbonate panel.
ColorGard metal roof snow guards by S5! provides the assurances you need while preserving the aesthetics you want for your roof. Avoid a mass of snow sliding off your roof in an uncontrolled manner which can damage property and cause injury. S5! is The Right Way!
Standing Seam metal roofing is an ideal platform to attach solar panels too. Using S5! attachment clamps and PV Kit you can install without penetrating the roof panel.
By using the proper cutting and folding tools for field Work you can get off the job faster. The right tools pay for themselves in labor time saved. We have a variety of tools available!
This is what you've been looking for...excellent part to accommodate numerous types of transition . Having 12" of gross width / stretch out, this part can be bent at the angle you specify to be a pitch change, wall flashing, high side cap or whatever you can dream up.
The Valley Cap is made of EPDM rubber, has UV inhibitors, and comes with a 20 year weather resistant warranty. The Valley Cap is easy to install, safer to use, comes in two different sizes, and eliminates the need to force the ridge line under the primary panel. Best of all it makes for a more esthetically pleasing leak-proof roof.
9" wide Grey EPDM with aluminum edges to contour to most shapes. Applications include transition walls, parapet walls, stepped roofs, corrugated metal roofs, expansion joints.
This vented ridge cap can provide natural ventilation exhaust of free flow air when installed with an equal amount of intake square feet. Options include flat skirt, die-formed skirt (shown), with or without damper & chain, 9" throat or 12" throat. 10' long sections. 1:12 standard pitch. Custom pitch available up to 6:12.
Self-adhering foam tape is an excellent alternative to butyl tape & foam closure strips. Conforms to contours and fills gaps. Maintains a seal during thermal expansion and contraction.
Tacky Tape applications include metal roof endlaps, sidelaps, vents, pipe flashings, skylights. Will not become brittle or crack. Available in various thicknesses and widths depending on application.
Form fits to the metal roof profile. Adhesive temporarily holds in place until ridge cap or roof panel in placed on top. "Outside closure" is under the ridge cap and should be installed 1" from edge of ridge to limit weather exposure with lap screw penetrating thru the closure to hold in place.
Material is non-woven, UV resistant, polyester fabric. Passes the extreme wind-driven rain test. Application is the exhaust condition at metal roof ridge cap or high eave. Exhaust square inches should match intake square inches.
Uniquely engineered breathable material surrounded by foam closure strip that is molded to the shape of Gideon Tuff-Rib AG or Gideon
Made with EPDM rubber, Roofjack RD is compounded for maximum resistance to ozone, UV light & temperature extremes. Flexible aluminum base will allow the flashing to conform to most metal roof configurations.
Excellent to wrap around when the top of a pipe is restricted or has a lid or cap. Stainless Steel teeth grip the EPDM material and secure it tightly.
This EPDM extreme angle pipe flashing has a built in 40 degree pitch. Accommodates roof pitch from 35 to 65 degrees while contouring to most metal roof configurations.
This EPDM product is an effective way to flash around turbine. 11-3/4" square is the inside cut out and 24" square is the total outside dimension. Not sold with turbine.
Excellent for solar hardware, this (5) port design is 4-1/2" square base x 2-1/2" tall flashing:
(1) 0" - 2" pipe
(2) 3/8" pipe/cable
(2) 3/4" pipe cable
This (2) port design is a "mini" having only a 3" square base can accommodate:
(1) 0" - 13/16" pipe/wire (center)
(1) 1/4" - 3/8" pipe/cable
"Fast and accurate"...is how our service is best described.
Whether it’s our quick and friendly response to an estimate for materials, consulting about best install practices, or the honesty and value we bring to every interaction, your business has a competitive advantage when we are on your team!
Good culture is hard to create and maintain.
Gideon Steel was founded with the mind set to:
1. Do it right the first time
2. Always strive for zero defects
3. Treat others the way we want to be treated
This formula has earned customer loyalty and maintains a culture of success. Some say, "If it's easy it's not worth doing".
Since 2005, we have been striving to provide our clients the best experience possible to earn their trust and achieve their satisfaction through our performance. And our clients have shown their appreciation by coming back to us repeatedly.
We are thankful for their continued support!
We love our customers, so feel free to visit during normal business hours.
4041 Will Rogers Parkway, Oklahoma City, Oklahoma 73108, United States
08:00 am – 05:00 pm
Loading / Receiving hours
08:00 am - 11:30 am and 01:00 pm - 04:30 pm
Copyright © 2023 Gideon Steel Panel Company - All Rights Reserved.
Powered by GoDaddy